Powder Transfer Pump
8 kg/min powder delivery from box to feed center
Transfers powder from boxes or containers to the feed center at 8 kg/min — the highest delivery rate among comparable transfer pumps. Dense phase operation moves powder at low velocity and high density, which preserves powder quality and maintains consistent particle size.
Especificaciones
- Delivery
- 17.6 lbs/min
- Type
- Dense phase
- Configuration
- Cart + lance
Características principales
- 8 kg/min delivery — highest rate among comparable pumps
- Dense phase operation — low velocity preserves powder quality
- Cart and lance configurations — flexible positioning
- Reduces powder degradation — maintains particle size consistency
- Standalone transfer between any two points in the powder circuit
Dense Phase Technology
Unlike venturi (injector) systems that blow powder at high velocity through a small orifice, dense phase pumps move a dense slug of powder through the hose at lower speed. The result: less mechanical stress on the powder particles, less fines generation, and more consistent coating results — particularly important for metallic, bonded, and specialty powders.
Transfer Rate
7.9 kg/min effective transfer rate — the highest in its class. This means the feed center refills faster, reducing the risk of the powder level dropping during high-output production runs. Powder feed to guns: up to 700 g/min.
Safety and Compliance
ATEX II 3D rated for use in powder coating environments. IP54 protection class. Timer monitoring for replacement part lifetime — the system alerts when wear parts are approaching end of life, preventing unexpected failures.
¿Tiene preguntas sobre el/la Powder Transfer Pump?
Nuestro equipo de ingeniería puede ayudarle a evaluar si este es el sistema adecuado para sus requisitos de producción.
Configuration
Available with cart and lance for mobile operation — move the pump to wherever the powder supply is located. Also functions as a standalone transfer unit between any two points in the powder circuit. Quick-connection fittings allow part changes during operation without stopping the pump.
¿Interesado en el/la Powder Transfer Pump?
Contacte a nuestro equipo de ingeniería con sus requisitos. Respondemos en 1 día hábil.