
Powder Transfer Pump
8 kg/min powder delivery from box to feed center
Transfers powder from boxes or containers to the feed center at 8 kg/min — the highest delivery rate among comparable transfer pumps. Dense phase operation moves powder at low velocity and high density, which preserves powder quality and maintains consistent particle size.
Specifications
- Delivery
- 17.6 lbs/min
- Type
- Dense phase
- Configuration
- Cart + lance
Key Features
- 8 kg/min delivery — highest rate among comparable pumps
- Dense phase operation — low velocity preserves powder quality
- Cart and lance configurations — flexible positioning
- Reduces powder degradation — maintains particle size consistency
- Standalone transfer between any two points in the powder circuit
Dense Phase Technology
Unlike venturi (injector) systems that blow powder at high velocity through a small orifice, dense phase pumps move a dense slug of powder through the hose at lower speed. The result: less mechanical stress on the powder particles, less fines generation, and more consistent coating results — particularly important for metallic, bonded, and specialty powders.

Transfer Rate
7.9 kg/min effective transfer rate — the highest in its class. This means the feed center refills faster, reducing the risk of the powder level dropping during high-output production runs. Powder feed to guns: up to 700 g/min.
Safety and Compliance
ATEX II 3D rated for use in powder coating environments. IP54 protection class. Timer monitoring for replacement part lifetime — the system alerts when wear parts are approaching end of life, preventing unexpected failures.
Have questions about the Powder Transfer Pump?
Our engineering team can help you evaluate whether this is the right system for your production requirements.
Configuration
Available with cart and lance for mobile operation — move the pump to wherever the powder supply is located. Also functions as a standalone transfer unit between any two points in the powder circuit. Quick-connection fittings allow part changes during operation without stopping the pump.
Interested in the Powder Transfer Pump?
Contact our engineering team with your requirements. We respond within 1 business day.