Touchscreen Spray Gun
Recipe storage and full parameter control via touchscreen
For operations that need to store and recall coating parameters across shifts or operators. The touchscreen interface lets you save recipes per part type, so a new operator can load the right settings and produce the same finish quality as an experienced one. Up to 85% transfer efficiency. Quick-change nozzle system for switching between flat jet (profiles) and round jet (general) without tools. Compatible with automatic reciprocators for semi-automated operation.
Specificaties
- Voltage
- 0-100 kV adjustable
- Control
- Touchscreen
- Feed System
- Injector or dense phase pump
- Nozzle
- Quick-change flat & round
Belangrijkste Kenmerken
- Touchscreen interface — save and recall recipes per part type
- Recipe storage across shifts — consistent finish from any operator
- Up to 85% transfer efficiency — minimizes powder waste
- Quick-change nozzle system — switch flat/round without tools
- Compatible with reciprocators for semi-automated operation
Recipe Storage
Store complete spray recipes including kV, uA, powder output, and air settings. Each recipe is saved with a name and can be loaded with a single touch. This eliminates the risk of an operator dialing in wrong parameters and producing a batch of rejects.
Typical use: a facility coating 5-10 different part types stores a recipe for each. When the production schedule changes to a different part, the operator loads the recipe and the gun is ready.
Parameter Visualization
The touchscreen displays all active parameters in real time — voltage, current, powder output, air pressure. This gives the operator and supervisor immediate visibility into what the gun is doing, without checking a separate control unit.
Quick-Change Nozzle System
Switch between flat jet (for profiles) and round jet (general purpose) nozzles without tools. The quick-change system locks the nozzle in position with a twist — no screws, no alignment adjustment.
Heeft u vragen over de Touchscreen Spray Gun?
Ons engineeringteam kan u helpen beoordelen of dit het juiste systeem is voor uw productievereisten.
Reciprocator Compatible
The Touchscreen gun can be mounted on a reciprocator for semi-automated operation. In this configuration, the gun moves up and down automatically while the operator or conveyor handles part positioning. This is a common intermediate step between fully manual and fully automated coating.
Geïnteresseerd in de Touchscreen Spray Gun?
Neem contact op met ons engineeringteam met uw vereisten. Wij reageren binnen 1 werkdag.